Recently, a friend of Zhongtaojun was renovating his home, and the plasterer asked him a question, "How do you want to deal with the corner lines of ceramic tiles in your home?" My friend: Black question mark. jpg
Not only friends from Zhongtaojun don’t know about this problem, but you, the decoration novice who is reading this article, must also be stumped! So today Zhongtaojun will tell you about home decoration. How to deal with tile sunken corners?
1. What is the angular line of ceramic tiles?
The angular line, also called the angular closing strip or the angular strip, is a decorative line used to treat the 90-degree convex angle of ceramic tiles. It uses the bottom plate as the surface and makes a 90-degree fan-shaped arc surface on one side. The material is PVC, aluminum alloy, and stainless steel.
2. How to deal with the corner lines of ceramic tiles?
1) Use three nails to fix the corner line at the installation location so that the corner line of the tile is parallel to the wall. (Note: When the external corner line is fixed, reserve a space with the same thickness of the tiles used to connect the corner line of the wall and the other side when laying tiles.)
2) Spread tile adhesive or cement on the corner lines of the tiles, stick the tiles on, and keep the arc surface of the corner lines of the tiles tight with the joints of the tiles.
3) Lay the tiles on the other side and use the tiles close to the corner line to keep the contact between the corner line and the tiles smooth and seamless.
4) After laying the tiles, clean the corner lines and arc surfaces of the tiles, and the installation is completed.
3. Precautions for installation of ceramic tile sun corners
1. The maximum gap between the ceramic tile corner line and the floor should be small.If it is less than 3mm, use a 1 yuan coin to insert it. If more than 2 coins are inserted, the gap may be too large.
2. Before laying the skirting, the wall with white cement should be shoveled clean, and then the skirting should be laid. After the skirting is laid, attention should be paid to protecting the skirting to prevent a large amount of paint from sticking to it when painting or spraying. The surface of the footing cannot be cleaned. It is recommended that after shoveling the cement, the paving position should be brushed with a mixture of 107 glue and cement before laying the tiles. This can make the tiles stronger.
3. The installation of ceramic tile bump corners is easy, saving time and materials. Protect the tiles with sunken corners. The ceramic tiles do not need to be cornered or bump corners. If you are skilled, you can complete the installation with only three nails; The curved surface of the corner line is smooth and beautiful, and the lines are straight and bright, which can effectively ensure the straightness of the edges and corners, making the corners of the ceramic tiles more three-dimensional; the sun corner lines are rich in color and can be matched with the same color or contrasting colors, with different effects; < /p>
4. Tile paving and installation are labor-intensive, so pay attention to choosing sun-corner products with reasonable design. At present, in the domestic market, among the external corner materials for ceramic tiles, PVC ceramic tile external corners are widely popular, cheap, and widely consumed. The disadvantage is that the thermal stability and impact resistance are relatively poor; Aluminum alloy material has a relatively low density, but has very high strength and good plasticity, and can be processed into various profiles; the stainless steel series is resistant to corrosion by chemically corrosive media. This type of external corner line needs to be customized according to customer needs, and the number of opening manufacturers has increased. , Due to technical and raw material problems, there are few sealing manufacturers.
4. What are the materials for the angular lines of ceramic tiles?
1. Pvc material sun corner line
Pvc external corner wire has a wide range of uses, a large amount of use, and is relatively cheap, so it is relatively popular. However, the external corners of PVC material have poor thermal stability and impact resistance, and are prone to embrittlement over time and eventually lose their effectiveness.
2. Aluminum alloy material positive angle line
We all know that aluminum alloy has high strength, close to high-quality steel, and good plasticity, so it can be processed into various profiles. It also has excellent thermal conductivity and corrosion resistance and is widely used in industry. Aluminum alloy, as the external corner line, can be matched with ceramic tiles of various shapes. It is cheaper than stainless steel and has better aesthetics.
3. Stainless steel external angle line
The external corners of stainless steel are relatively good, because stainless steel is resistant to weakly corrosive media such as air and steam, and has better oxidation resistance, corrosion resistance, and service life. The only shortcomings are that the price is relatively expensive, the colors are single, and the effect when used in home furnishings is not that good.
The above is the content of this article about Tile corner lines. Do all the decoration novices understand it?
